Building ventilation system Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Roof ventilation Rimpia #840

Rooftop ventilation Rimpia #840

If you cut the existing product (length: 1800 mm) in half, it can be used for strong ridge applications, but there were opinions that 900 mm is a bit too long due to the positioning of the rafters, so we decided on 840 mm. This new product, Rimpia #840, is recommended for projects using ridge brackets. It comes with two pieces of 840 mm length and accessories (nails, screws, waterproof tape, installation instructions) packed in a small box, and five of these small boxes (two pieces each) are contained in a case [large box, size 200 x 300 x 1000 mm, weight approximately 10 kg]. In terms of length, one piece of the conventional 1800 mm corresponds to one small box. [Features] ○ Easy to install strong ridges using strong brackets. ○ Facilitates small-scale sales and installation of shorter ridges. ○ Easy to transport and carry, even possible with a passenger car. ● For other functions and details, please contact us.

Company：ふたば商事
Price：Other

Waterproof tape, adhesive, drain, protective panel
Waterproofing work
Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal and cosmetic slate combined ridge ventilation "Single Slope Double Fast"

[Total Performance No.1 Product] New construction method for a beautiful finish on wall surfaces! Metal roof and decorative slate combined ridge ventilation.

"Katayanagare Soukai" is a new construction method that does not directly fix to the wall, resulting in a beautiful finish. It is a cost-effective ridge ventilation system that can be used with both metal and slate materials. Thanks to the newly developed patented structure "Large Water Stop Plate Slide Structure," it allows for the use of decorative slate and metal roofing materials, effectively reducing product inventory and preventing installation errors on site. Additionally, the "new construction method" that does not directly fix to the wall eliminates waviness during installation, resulting in an outstanding aesthetic finish. 【Features】 ■ Dramatically improved design with the new construction method ■ Usable not only with decorative slate but also with metal roofing materials ■ Expected increase in inventory efficiency for ridge ventilation ■ No waviness or sagging, with concealed sealing at joints for a clean finish ■ Improved waterproof performance, accommodating slopes from gentle to steep, and increased ventilation capacity ■ Effects such as reduced product inventory and prevention of installation errors on site *For more details, please contact us or check the link below (our company website).

Company：トーコー
Price：Other

Ventilation and smoke exhaust equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Clay tile ridge ventilation "Elegant + (Plus)"

Reliable rain protection with high waterproof performance! Achieved through a double ventilation structure.

"Elegant + (Plus)" is a product that allows for ridge ventilation for clay tiles. Conventional products maintained waterproof performance with a deflector structure, but by adopting a double ventilation structure with upper and lower ventilation components, we achieved higher water-stopping performance than conventional products. Furthermore, by eliminating the deflector that was present in "Elegant," the appearance of the finished product has significantly improved, along with enhanced workability and safety. 【Features】 ■ High waterproof performance with double ventilation structure for reliable rain protection ■ Improved design, workability, and safety ■ Increased ventilation volume ■ Product design focused on the user ■ Fire-resistant specifications available as an option for semi-fireproof areas *For more details, please contact us or check the link below (our company website).

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Ventilation Swing for Slate Singles

【A Must-See for Residential Designers!】A 'Stunning Specification' that Overturns Industry Norms with Enhanced Ventilation and Waterproofing Effects through a <New Structure>

The "High Ventilation Swing" is a ventilation component for decorative slate and single roofs that accommodates gable and hip roof shapes. In recent years, due to the effects of global warming, such as the occurrence of large typhoons and sudden heavy rains, high performance is required for roofs in Japan. This product achieves a high level of two opposing performances: "high waterproof performance" that can withstand stormy weather and "high ventilation performance" that allows for ventilation even with short ridges like those of hip roofs. (Developed by our company using the "Side Wing Ventilation Structure" (patent pending)) 【Features】 - Waterproof performance that provides peace of mind even in stormy weather at the level of large typhoons → Passed extremely rigorous spray and wind tests with a rainfall rate of 240mm per hour and wind speed of 40m/s - Sufficient ventilation performance even with short ridges → Achieves an industry-leading effective opening area of 438cm² (1P) - Significantly improved workability for installation on roofs → Achieves more than three times the workability compared to our conventional products 【Side Wing Ventilation Structure】 - Utilizes wind power to create negative pressure with the side wings, creating a flow that expels air from the attic to the outside, preventing rainwater intrusion. - The wing effect utilizing wind power improves the ventilation performance of the attic. *For more details, please contact us or check the link below.

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[5/22 Renewal] Ventilation for Metal Roofs 'Single Slope i-ROOF2'

Attention all residential designers! The popular product "i-ROOF" has been fully remodeled and is being re-released.

The "Katanagare i-ROOF2" is the industry's first dedicated metal roof ridge ventilation system designed to withstand severe storms with strong winds, such as large typhoons and sudden heavy rain, featuring a high level of waterproof performance. The most significant feature of this renewal is the "Side Wing Ventilation Structure." This structure is adopted in all products of the series. Just as an airplane wing generates negative pressure through airflow, the side wings utilize wind power to create negative pressure, facilitating the flow of air from the attic to the outside and preventing rainwater intrusion. Additionally, the Side Wing Ventilation Structure not only enhances waterproof performance but also improves attic ventilation efficiency through the wing effect harnessing wind power. 【Spacer-In Flat Method - Achieving a Beautiful Finish on the Wall Side of the Single Slope -】 The "Spacer-In Flat Method," which has been well received in the Katanagare Soukai, is also adopted in the Katanagare i-ROOF2. This method, which uses "Wall Side Spacers," significantly enhances aesthetic appeal. The "Wall Side Spacers" provide support, suppressing the waviness on the wall side and resulting in a beautiful finish. Furthermore, by using "Wall Side Spacers," it eliminates the need for two site visits for temporary and final installation of the ridge ventilation, allowing for a one-stop installation process.

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Built-in roof ventilation system "Aozora (for stacking)"

Ridge ventilation compatible with stacked tiles such as flat tiles.

The "Aozora (for Noshizumi)" is a built-in ridge ventilation system made of stainless steel, offering exceptional durability. Being built-in, it provides a clean appearance. It is easy to install and helps reduce costs. The "for Noshizumi" is suitable for traditional Japanese tiles and can accommodate fire prevention measures with the installation of a fire damper for fire-prone areas. In addition, we also offer options for triangular crowns and slate, allowing you to choose according to your needs. We are currently giving away cut samples! Please feel free to contact us. 【Features】 ■ Clean appearance due to built-in design ■ Made of stainless steel for exceptional durability ■ Easy installation and cost reduction ■ Compatible with Noshizumi for traditional Japanese tiles ■ Can accommodate fire prevention measures with fire damper installation *For more details, please refer to the PDF document or feel free to contact us.

Company：片岡瓦工業本社
Price：Other

Others/Roofing materials (shingles, cement, steel sheets, aluminum)
Interior and exterior construction accessories
Disaster prevention fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Built-in roof ventilation system "Aozora (for slate)"

High-performance ridge ventilation developed for slate.

"Aozora (for slate)" is a built-in ridge ventilation system made of stainless steel, offering exceptional durability. Being built-in, it has a clean appearance. It is easy to install and reduces costs. The "for slate" model is integrated for easy installation, providing excellent workability and high functionality. In addition, we also offer options for triangular crowns and stacked tiles, allowing you to choose according to your needs. We are currently giving away cut samples! Please feel free to contact us. 【Features】 ■ Clean appearance due to built-in design ■ Made of stainless steel for exceptional durability ■ Easy installation that reduces costs ■ High functionality ■ Integrated design for easy installation ■ Excellent workability *For more details, please refer to the PDF document or feel free to contact us.

Company：片岡瓦工業本社
Price：Other

Others/Roofing materials (shingles, cement, steel sheets, aluminum)
Interior and exterior construction accessories
Disaster prevention fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Renovation Roof Ventilation "Pakkun"

【Renovation defect insurance eligible construction product!】Ridge ventilation that can be installed using the existing metal sheets as they are.

"Pack Change" is a roof ventilation system for renovations that can shorten construction time with a simple three-step installation. It allows for the existing metal sheeting to be utilized as is while installing the main unit. By efficiently ventilating the attic, it contributes to the longevity of the home and is effective in addressing summer heat and winter attic condensation. 【Features】 ■ Can be installed using the existing metal sheeting as is ■ Three-step installation ■ Efficiently ventilates the attic ■ Effective in extending the lifespan of the home, addressing summer heat, and preventing winter attic condensation ■ Eligible for renovation defect insurance *For more details, please contact us or check the link below (our company website).

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slate-type natural ventilation "S-type ventilation ridge"

[Best-Selling No. 1 Product] Standard Type Ventilation Ridge for Gable and Hip Roofs 'Renewed with Built-in Type'

The "S-type Ventilation Ridge" is the best-selling No. 1 standard type ventilation ridge (for gable and hip roofs). It achieves attic ventilation and water resistance with a simple design, and allows for easy installation using dedicated fixing screws. It has been renewed from a fire protection device installation type to a built-in type, enabling fire protection specifications without compromising the effective opening area. This long-selling product has been on the market since 1996, with cumulative sales exceeding 800,000 units, and more than 40,000 units are still released each year. 【Features】 - Achieves attic ventilation and water resistance with a simple design - Easy installation using dedicated fixing screws - Compatible with fire protection specifications *For more details, please contact us or check the link below (our company website).

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Slate single ridge vent "Swing"

【Attention residential designers!】The birth of revolutionary roof ventilation that will "change the standard" as we know it.

"Swing" is a ventilation component for decorative slate and single roofs that corresponds to gable and hip roof shapes. In recent years, due to the effects of global warming, such as the occurrence of large typhoons and sudden heavy rains, high performance is required for roofs in Japan. This product features our developed "Side Wing Ventilation Structure" (patent pending), which ensures reliable waterproof performance even during the severe storms of large typhoons. 【Features】〇 Reliable waterproof performance even in severe storms of typhoon level → Passed the water spray and wind test with a rainfall rate of 240 mm per hour and wind speed of 40 m/s 〇 Improved ventilation performance alongside waterproof performance → Achieves an effective opening area of 438 cm² (2P). [28% increase in ventilation performance compared to our conventional products] 〇 Enhanced design and convenience → After installation, it aligns with the dedicated ridge, resulting in a simple design where ridge ventilation is not prominent. The product design accommodates roof slopes, improving on-site convenience. 【What is the Side Wing Ventilation Structure?】 - Utilizes wind power to create negative pressure with the side wing, generating a flow that expels air from the attic to the outside, preventing rainwater intrusion. - The wing effect utilizing wind power enhances the ventilation performance of the attic. *For more details, please contact us or check the link below.

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[5/22 Renewal] Ventilation for Metal Roofs 'i-ROOF2'

Attention all residential designers! The popular product "i-ROOF" has been fully remodeled and is being re-released.

The "i-ROOF2" is the industry's first dedicated ridge ventilation system for metal roofs, designed to withstand severe storms accompanied by strong winds, such as large typhoons and sudden heavy rains, with a high level of waterproof performance. The most notable feature of this renewal is the "Side Wing Ventilation Structure." This structure, adopted in all products of the series, enhances ventilation performance by creating a flow that generates negative pressure through the airflow over the wings of an airplane, allowing air to be expelled from the attic to the outside. Additionally, the Side Wing Ventilation Structure not only improves ventilation performance but also prevents rainwater from entering the attic by utilizing the wing effect created by the force of the wind. 【Improved Design Aesthetics by Making Ridge Ventilation Less Noticeable】 The old product had a step in the ridge ventilation area, making it prominent, but the Side Wing Ventilation Structure allows for the ridge ventilation area and the general ridge area to be installed at the same level without any steps. By making the ridge ventilation less noticeable, it results in a cleaner design. ● For more details, please contact us or check our company website.

Company：トーコー
Price：Other

Ventilation openings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[5/22 Renewal] Ventilation for Metal Roofs "i-ROOF2 Series"

Attention all residential designers! The popular product "i-ROOF" has been fully remodeled and is being re-released.

Our company offers the 'i-ROOF2 Series,' which allows for ventilation of metal roofs. The "Side Wing Ventilation Structure" utilizes the power of the wind to create negative pressure with the side wings, similar to how an airplane wing generates negative pressure from airflow. This creates a flow that expels air from the attic to the outdoors, preventing rainwater intrusion. Additionally, the Side Wing Ventilation Structure not only provides waterproofing performance but also enhances attic ventilation performance through the wing effect that utilizes wind power. 【Features】 ■ Passage: Wind flows through the ridge ventilation ■ Generation: Negative pressure is generated in the groove due to the structure's effect ■ Promotion: Ventilation is promoted by the effect of negative pressure *For more details, please refer to the PDF materials or feel free to contact us.

Company：トーコー
Price：Other

Metal roof

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Building ventilation system "Oasis"

A natural ventilation system utilizing temperature differences and wind pressure differences! Achieving both efficient ventilation and excellent waterproofing.

"Oasis" is a ridge ventilation system that allows for flexible roof slopes and is easy to install. It prevents condensation in the attic, expelling moisture and heat, thus preventing building corrosion and extending the lifespan of the house. Additionally, it achieves both efficient ventilation and excellent waterproofing, eliminating concerns about leaks even in heavy rain and wind. 【Features】 ■ Natural ventilation method utilizing temperature differences and wind pressure differences ■ Prevents condensation in the attic, expelling moisture and heat, and preventing building corrosion ■ No worries about leaks ■ Developed for asbestos cement and metal roofs ■ Efficient as it requires no maintenance or running costs *For more details, please refer to the PDF document or feel free to contact us.

Company：銅市金属工業本社・工場
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Built-in roof ventilation system "Aozora"

Made of stainless steel for exceptional durability! Easy installation leads to cost reduction!

"Aozora" is a built-in ridge ventilation system made of stainless steel, offering exceptional durability. Being built-in, it also has a sleek appearance. We offer options for flat tiles, 7-inch round tiles, stacked tiles, and slate, allowing you to choose according to your needs. Fire dampers are also available for flat and stacked tile options. 【Features】 ■ Sleek appearance due to built-in design ■ Exceptional durability with stainless steel construction ■ Easy installation that reduces costs *For more details, please download the PDF or feel free to contact us.

Company：片岡瓦工業本社
Price：Other

Others/Roofing materials (shingles, cement, steel sheets, aluminum)
Interior and exterior construction accessories
Disaster prevention fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Built-in roof ventilation system "Aozora (for triangular crowns)"

Triangular ridge ventilation used for flat tiles, etc.

The 'Aozora (for triangular crowns)' is a built-in ridge ventilation system made of stainless steel, offering exceptional durability. Being built-in, it provides a clean appearance. It is easy to install and helps reduce costs. The 'for triangular crowns' is used with flat tiles and can accommodate fire prevention areas with the installation of a fire damper. In addition, we also offer options for batten stacking and slate, allowing you to choose according to your needs. We are currently giving away cut samples! Please feel free to contact us. 【Features】 ■ Clean appearance due to built-in design ■ Made of stainless steel for exceptional durability ■ Easy installation and cost reduction ■ Used with flat tiles, etc. ■ Can accommodate fire prevention areas with the installation of a fire damper *For more details, please refer to the PDF document or feel free to contact us.

Company：片岡瓦工業本社
Price：Other

Others/Roofing materials (shingles, cement, steel sheets, aluminum)
Interior and exterior construction accessories
Disaster prevention fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Building ventilation system Product List and Ranking from 4 Manufacturers, Suppliers and Companies

Building ventilation system Product List

Related Categories of Building ventilation system